|
 |
"The Original Gann Trader Software
Since 1986"
|
 |
Ganntrader
3 's Newest Release Out Now!!!
Pure Gann! NOW REAL TIME!! GannTrader 3 IS NOW INTRA DAY!
Click Here for a FREE mailed brochure.
Introduction:
If you want to use Gann's techniques,
Ganntrader 3 is a complete Gann program available that you can turn
to for help.
This software is Bill McLaren's preferred software package. Bill McLaren is
possibly the most famous exponent of Gann in the world appearing on CNBC and
many other programs. McLaren helped design this software.
In this one package, all the methods that you must learn
in order%% to make effective use of the techniques are built into the
program.
These are:
 |
the geometric angles |
 |
division of the range |
 |
7 times the base |
 |
squares of the high, low and the range |
 |
natural squares of 52, 90, 120, 144 and 360 |
What's more, the study of the planet
time cycles and aspects is an important part of Gann's work that
should not be overlooked. With this version of Ganntrader, all
aspects of Gann's methods that have been discovered have been
included. In fact, other detracting technical analysis techniques
have intentionally been excluded. You can be sure that Ganntrader 3
is pure unadulterated Gann.
GannTrader 3 moves your trading and analysis moves closer to Gann's and also includes many Masonic Mystery Methods.
Imagine being able to Square the Circle using Fib Ratios, Ratios of the Circle and the Squares of Numbers
Ganntrader 3.0 has been designed to allow you an easy way to test and verify each of Gann's techniques
that he describes in his books. That makes practicing the required
techniques easy!
Click here to read Peter Pich's comments about his own
software.
Features:
 |
Up to 1200 price bars displayed, depending on
video mode with unlimited zoom capability down to 10 bars on the screen. |
 |
Optional mouse support with pull down menus. Keystroke equivalents. |
 |
Built-in help displays. |
 |
Project blank grids with angles, squares, or planets out to future dates. |
 |
Optionally excludes weekday holidays in a trading day chart. |
 |
Print or display volume and open interest. |
 |
Print or display 5 or 6 trading day, 7 calendar day or 5 day charts. |
 |
Print charts at 8, 12, and 24 grids per inch. NLQ 24 pin printers print at 20 grids per inch instead of 24. Grid patterns can be 8x8, 8x10 or 10x10. Charts can be
over 50 feet in length and 8 or 13 inches tall. Multiple passes are automatically printed for later paste-up when necessary. |
NOW YOU CAN PRINT BIG CHARTS ON A EPSON & HP INKJET& LASER PRINTERS!
Gann Angles:
Draw angles from All highs and lows, Major highs and lows, Back 360 highs and lows andUser Selected highs and lows. Cycle counts of Selected angles are
included in printouts.
Back 360 angles are multiples of 360 time units (45, 60, or 72) from
the cursor's position.
Individually enable or disable the 1x1, 2x1, 3x1, 4x1, 8x1, 1x2, 1x3,
1x4,1x8 angles. The rate of rise of the 1x1 angle can be set by the user.
The slope of the angles is automatically adjusted for changes in the chart'sprice scale so that the 1x1 relationship is maintained.
Individually enable or disable the up-trend, downtrend, up from lows,
down from highs,
angles from lows, highs or zero
Gann Squares:
Natural squares of 120, 360, 144, 52, 60, 72, 180, 90 are created
with a single hit of the number keys 2 through 9. Key 1 is reserved for a user defined "hot" square.
Squares of the highs, lows or ranges can be created with a single keystroke. Up to 5 squares can be saved with each file setup.
Unlimited when combined with batch mode.
Individually enable or disable the 1x1, 2x1, 3x1, 4x1, 8x1, 1x2, 1x3,
1x4, 1x8 angles, Time Angles, Time Divisions, Price divisions inside the square.
Division of the range and "7 times the base" can be converted into a square of the range
with a single keystroke.
Gann Planets
Print or display planet earth or sun views of longitude converted to
price following Gann's methods. The longitude to price conversion factor can be set by the user.
Individually enable or disable each planet's plot and any of the
following planet aspects: 5/8°, 7½°, 11¼°, 15°, 22½°,
30°, 36°, 40°, 45°, 60°, 72°, 90°,
120°, 180°, 360° plus the zodiac sign divisions.
The longitude and aspect distances for the date of the cursor are
displayed for exact measurements
Print or display the planet averages, MOF, CE, Average of 5, 6 and 9.
Click here for an example.
Gann Swing Charts:
New is Gann's Trend Line Indicator and Main Trend Indicator.
The Trend Line Indicator is a price indicator.
The trend line follows the high or low price when
the previous swing is broken by a certain number of points. The user
can set this trigger point.
The Main Trend Indicator requires that the market make higher highs or lower lows for a certain number of
days before the line is moved up or down.
Gann usually used 3 days in his work, but this value is also user defined.
With these indicators Gann was looking for an "overbalance" of price or time.
For example, if a market goes up for 4 days, reacts for 2 and goes up 4 days
and then reacts for 3 or more, Gann would say there was an overbalance of
time since the market has more down days than before.
This would be an indication of a possible change of trend. Ganntrader adds a
"Shade Swings" feature that gives a quick visual indication by the
change in the widths and heights of the boxes surrounding the swing
lines. Also, if both the Main Trend and Trend Line Indicators are on
the screen at once, the boxes change to green on those periods when
both indicators are moving in the same direction.
Make your Trading Day Easier with Batch Mode:
Information such as the chart scale,
value of the 1x1 and planet angles, setup of squares and angles, type
of daily chart and printer grid pattern can be saved for future use
the next time the file is loaded.
The setup can be saved individually or as part of a group of setups in batch files. Each setup in the
batch file can be scrolled to the screen by hitting the TAB key.
The setups in the batch can also be sent to the printer for hours of
unattended printing.
Real Time Gann Trading - Live Data:
Using the popular Quote.com and Metastock RT Feeds. So really will know when the Time is Square!
see technical specifications for details.
Technical Specifications:
Ganntrader requires a Pentium 4 or better, at least 16 Mb RAM, although a fast Pentium machine with at
least 64 Mb RAM is recommended. Ganntrader will utilise a maths co-processor if installed. Chart printing requires any IBM or Epson
dot matrix continuous form printer, 9 or 24 pin for unlimited length charts. GT3 now supports Espon Stylus Colour Ink Jet Printers.
Page printers such as laser printers are supported with screen dump program supplied.
Works on Vista Win 98, Win XP, Win 2000 and Win ME
Ganntrader reads Metastock CSI, QuickTrieve,CSI, CompuTrac or MetaStock
data formats
with data file length limited only by available memory (5Mb would permit 50,000 days)for End of Day Data.
Ganntrader reads MetaStock Intra Day Format.
The program has been tested with quote.com (www.quote.com) using QCollector (www.mechtrading.com) and should also work with MetaStock RT and OmniView
by Mietek Szolach (mszolach@aol.com).
Up to 1200 price bars can be displayed on the screen, depending on video mode, with unlimited zoom and scroll capability
down to 10 bars on the screen. ADEST supplies Australian US and World futures and share data to work in GannTrader 3.
Ganntrader works in Win Vista, Win XP, Win 2000, Win ME, Win NT, Win 98 & Win 95.
Supports EGA, VGA, SVGA, XGA 800x600, 1024x798, 1280x1024 colour modes.
Gann Trader Key Benefits
The original AND only complete Gann program available
includes every aspect of Gann's methods
pure unadulterated Gann
CLICK HERE for
examples of GT 3 CHARTS!!
Pricing:
All major credit cards & PayPal Accepted - Free Domestic US Shipping with Pay Pal Orders

Your NO RISK GUARANTEE:
FULL 30 DAY MONEY BACK GUARANTEE ON GANNTRADER 3 Software.
If you are not satisfied for any reason with the software just return it within 30 days
and receive a full discount on the purchase price. Shipping excluded.
Order GT 3 on Line Securely Click here
Or see our main catalogue Click here=> Catalog
Want to know more about Gann?
Go to Who
is Gann
Go to Gann
books
Go to Gann courses
Go to Peter Pich's comments about
Ganntrader
Call us on 1.312.212.3868
Go to Peter Pich's comments about GanntraderFor all other enquiries click here
Are you a bit overwhelmed? Like to Learn Powerful Potential Gann Methods - Free?
You'll learn more about the techniques you saw above?
Just request the Free Article via email & Desktop Delivery
now click here>>
|